Inorganic compounds in drinking water

Inorganic compounds in drinking water

More and more people are becoming aware of the fact that drinking water as pure as they want. In general, contaminants in drinking water be organic or inorganic. This article describes some facts about inorganic compounds found in water.

The U.S. Environmental Protection Agency is responsible for setting maximum contaminant levels for drinking water. These standards are expressed as the MCL (maximum contaminant levels). In most cases, theseThe measurement is expressed in milligrams per liter (mg / l) or parts per million (ppm).

In general, these materials are inorganic compounds that contain carbon. These compounds are often able to be dissolved in water. For example, dissolved gases such as nitrogen, oxygen, methane and radon are classified as inorganic compounds.

In addition to dissolved gases, some metals in water as well. Some of these metals can be hazardous to human health,and can be introduced into the water, naturally or through human activities.

Some of the common metals are arsenic and aluminum, the EPA has established an MCL of not more than.05. Bring with MCL of.015. Mercury of.002 MCL. In addition, zinc, calcium, sodium, magnesium, potassium and copper, all with MCL 1.3.

Lead, mercury and arsenic can be harmful to human health even at low concentrations, as already mentioned, our water is imported from aVariety of sources, including old pipes and lead solder. On the contrary, some of the other inorganic compounds such as sodium, potassium, calcium and magnesium, important for our health and well-being.

Another class of inorganic compounds are known as negative ions. These include substances such as fluorides: MCL 4.0 ppm (parts per million). Ppm of chloride and nitrate MCL 10.0. Nitrite MCL 1.0. Sulphate, phosphate, carbonate and cyanide: MCL 0.2

You will find that in this releaseClass of negative ions, the fluorine compound. Fluorine can appear naturally in water but in very small amounts. Many water treatment plants add fluoride to the treated water to bring the level to be of benefit to an amount that can be used for healthy teeth. However, some people prefer not to fluoride in drinking water, especially if it contains fluoride toothpaste. It 'can get too much fluoride in the human body and can actually lead to toothDecay.

The good news is that many of these compounds with water filters can be treated. A good place for all uses of the filter to use water can help reduce the weight of many impurities in the water and your family connected to protect against any potential health problems of water contamination. The best way to get the best results, is an expert on water filters companies to contact and discuss your specific requirements with an expert.

mr whippy ice cream maker 17in laptop bags